Keep brick pavers rich in color and clean
Brick Paver Sealing in Fruit Cove, FL
Ask for a free estimate to seal brick pavers at your Fruit Cove home, or call (904) 830-9782.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals brick pavers in Fruit Cove, and how soon will I get an answer?
A local contractor can seal brick pavers anywhere in Fruit Cove, FL, and your request gets an answer inside 1 business day, often much earlier in that day. The estimate is free, nobody expects a yes on the spot, and a brick job gets its own plan. To talk to someone now, call (904) 830-9782.
Brick weathers differently from poured concrete: it soaks up water, shows green fast under shade and can turn dull and uneven after a few humid summers. A matched sealer and a clean, dry surface bring the warm color back. Say whether your brick is a driveway field, a border or a patio when you ask for a free estimate.
Is brick sealed differently from concrete pavers?
Yes, and this is where cheap bids go wrong. Unilock says different materials absorb at different rates and advises confirming that a product suits brick or natural stone. HydroSeal says concrete pavers and natural stone get different product decisions. Hydro Wash 360 calls stone and brick more porous and prices them 15 to 30 percent higher. To ask what a contractor plans for brick, call (904) 830-9782.
The first sign of a careful bidder is the question about what your brick is. Clay brick, concrete brick-look pavers and brick borders around concrete can each want their own product. A photo and a few details when you ask for a free estimate make the answer more exact.
Should brick get a penetrating sealer or a film-forming coat?
Published advice splits here, which is why the product name matters. Old Mill, a brick products company, says outdoors to use breathable penetrating sealers such as silane or siloxane and to avoid film-forming acrylics and urethanes. Jax Exterior Cleaning describes a two-part water-base urethane with two coats, and three on brick that has never been sealed. To hear what a bidder would choose and why, call (904) 830-9782.
Sealwithease adds another angle: a water-based sealer suits porous brick laid with joint sand because it hardens the sand, while a solvent sealer suits smooth, non-porous stone. None of these sources can see your brick. Ask for the product name, the finish and the number of coats in writing when you ask for a free estimate.
Do new brick pavers have to wait before they are sealed?
They do. Old Mill says to allow at least 30 days and ideally up to a year before sealing new exterior brick. Unilock says to wait 60 to 90 days, longer if efflorescence is still showing, and Jax Exterior Cleaning says about 90 days for new pavers. Sealer put on too early traps what the brick is still releasing, so tell the contractor the install date when you call (904) 830-9782.
Brick laid last spring may be ready this fall, while brick laid last month is not. Fruit Cove has grown quickly, from 16,077 people in 2000 to 32,143 in 2020 according to Wikipedia, so plenty of brick walks and courtyards are still young. A contractor can look for haze before quoting. To have yours checked, ask for a free estimate.
What is the white haze on my brick pavers?
White powder on brick is usually efflorescence, a salt deposit carried to the surface by moisture. Unilock says it typically clears in two to three months and can take up to a year. Old Mill says to dry brush it off before using any water and warns that sealer must never go on over moisture, dirt or efflorescence because it locks them in. To have a patch looked at, call (904) 830-9782.
Old Mill adds that trapped moisture from the wrong sealant can bring efflorescence, spalling or surface damage later. That is the reason a contractor tests a small hidden spot first, as Unilock and Old Mill both advise. Mention any haze when you ask for a free estimate.
Which Fruit Cove area towns can ask about brick paver sealing?
Brick pavers in Fruit Cove and in the nearby towns below can ask for a free estimate. Choose a place to read notes written for it, or call (904) 830-9782 if yours is not listed.
What does brick paver sealing cost in Fruit Cove?
No local company publishes a separate per-square-foot rate for brick, so the table below builds one from pieces that are published. Safe Touch lists $1.75 to $3.25 per square foot for a full clean, sand and seal in St. Johns County, and Hydro Wash 360 says brick and natural stone run 15 to 30 percent more. For a price on your own brick, ask for a free estimate.
A 400 square foot brick courtyard shows the arithmetic: $700 to $1,300 at the base rate, then $805 to $1,690 once the 15 to 30 percent is added. Stripping failed sealer adds $0.75 to $1.50 per square foot and joint sand adds $0.25 to $0.75. That is a worked example, not a quote, so call (904) 830-9782 for one.
| Brick work | Published figure | On a 400 sq ft brick area |
|---|---|---|
| Clean, sand and seal, base rate | $1.75 to $3.25 per sq ft | $700 to $1,300 |
| Brick and stone adjustment | 15 to 30 percent more | $805 to $1,690 with it applied |
| Stripping failed sealer | $0.75 to $1.50 per sq ft | Add $300 to $600 |
| New joint sand | $0.25 to $0.75 per sq ft | Add $100 to $300 |
The base rate is from Safe Touch's St. Johns County page and the other figures are from Hydro Wash 360's 2026 Jacksonville guide, read in November 2026. No source gives a separate brick rate, so the table combines the pieces. Real quotes can land above or below.
Will sealing change the color of brick?
It can, and that is a choice to make before the job. Old Mill says some sealers darken brick or give it a wet, glossy look. Unilock says a wet look deepens paver color and may add gloss, while a natural finish stays close to the unsealed look. First Coast SoftWash describes the same pair: a natural-look sealer or a color-enhancing one. To see samples, call (904) 830-9782.
Sealwithease notes that a water-based sealer on porous brick does not turn it shiny anyway. Jax Exterior Cleaning offers a color-enhancing wet look or a matte finish. Test on a hidden brick or a spare one, and check it again dry the next day when you ask for a free estimate.
How is brick cleaned and dried before a coat goes on?
First Coast SoftWash says concrete, brick and pavers handle controlled pressure, and Unilock warns that a high-pressure setting can blow out joint sand. Sealwithease says to allow at least 24 hours of drying before sealing and cautions that power washing suits brick best when the joints hold no sand. Ask the contractor how those fit together on your brick when you ask for a free estimate.
Gravity Wave adds a point about older work: peeling, whitening or trapped moisture in an old sealer changes the prep, and rust, oil and irrigation marks may not come out fully. Show any old coating to the contractor first. To book that look, call (904) 830-9782.
How does the brick paver sealing process work?
A brick job runs on the five steps below, with extra time for drying. Sealwithease advises sealing in one session and fixing uneven pavers first. To arrange a visit, call (904) 830-9782.
1. Identify the brick
The contractor notes clay or concrete, borders, age and any haze, and tests the sealer on a hidden spot.
2. Clean with control
Controlled pressure and a surface cleaner lift algae and film, with stains treated one by one.
3. Level and refill
Uneven pavers are adjusted and ASTM C144 kiln-dried joint sand goes in, per HydroSeal.
4. Dry fully
At least 24 hours of drying before any sealer, and longer in shade.
5. Seal in one session
A thin, even coat goes on without stopping partway, so the sheen does not vary.
How often does sealed brick in Fruit Cove need a new coat?
Hydro Wash 360 gives three to five years for pavers, and Jax Exterior Cleaning gives two and a half to three with a cleaning each year. Brick under oak shade may sit toward five, since the Hydro Wash 360 guide puts shaded patios near five years and driveways near three. To plan yours, call (904) 830-9782.
Wikipedia gives Fruit Cove an elevation of 20 feet, and Stallone's Pro Wash says river humidity and big trees are part of life here. The general paver sealing guide and the paver cleaning guide cover the parts every job shares. When you are ready for a look, ask for a free estimate.
What do sealed brick pavers look like around Fruit Cove?
What should I ask a contractor before sealing brick pavers?
Ask for the sealer name and whether it is penetrating or film-forming, the finish, the coat count and the dry time before the first coat. Ask whether the border and the field get the same product, and whether a hidden spot will be tested. To go through the list with someone, call (904) 830-9782.
Get the price split into cleaning, sand, stripping and sealing, with the brick adjustment on its own line. A gentle pace helps, because the estimate is free and a no is fine. When you are ready, ask for a free estimate.
Frequently Asked Questions
How to seal your brick pavers?
A contractor follows a set order: look the area over, clean it, fix uneven pavers, refill the joints, let everything dry and then coat in one session. Sealwithease advises at least 24 hours of drying before sealing and a thin layer. Old Mill says never to apply sealant over moisture, dirt or efflorescence. Brick is porous, so the product choice matters.
Why is paver sealing so expensive?
Brick adds to the usual prep cost. Hydro Wash 360 says natural stone and brick are more porous and run 15 to 30 percent higher than concrete pavers. Cleaning, joint sand and careful drying take the time, and the coat itself is a smaller part of the bill.
How long do paver sealers last?
Hydro Wash 360 says most pavers go three to five years between coats, and Jax Exterior Cleaning says two and a half to three years with a yearly cleaning. Unilock gives three to five years. The product matters more on brick than on concrete, since some sealers breathe and some do not.
How much does it cost to have pavers cleaned and sealed?
Safe Touch lists $1.75 to $3.25 per square foot for a full clean, sand and seal in St. Johns County. Hydro Wash 360 adds 15 to 30 percent for brick and natural stone, $0.75 to $1.50 per square foot to strip failed sealer and $0.25 to $0.75 for joint sand.
How long does paver sealer last in Florida?
Two and a half to five years, depending on who is asked and what the brick sees. Jax Exterior Cleaning says two and a half to three years. Hydro Wash 360 adds that Jacksonville's UV, humidity, hurricane-season rain and salt air shorten a sealer rated for much longer elsewhere.
What is the average cost to seal pavers in Florida?
Safe Touch's St. Johns County page lists $1.75 to $3.25 per square foot for a full clean, sand and seal. Hydro Wash 360's 2026 Jacksonville guide runs from $1.25 to $3.25 depending on size. Brick sits higher than the concrete figures, by 15 to 30 percent in that guide.
Should brand-new brick pavers be sealed right away?
No. Old Mill says to allow at least 30 days and ideally up to a year, Unilock says to wait 60 to 90 days and longer while efflorescence shows, and Jax Exterior Cleaning says about 90 days. Sealing too early locks in whatever the brick is still releasing.
What is the white haze on my brick pavers?
It is often efflorescence, a salt deposit that rises with moisture. Unilock says it typically clears in two to three months and sometimes takes up to a year. Old Mill says it should be brushed off dry before any water is used, and that sealer must never go over it.
Will sealing change the color of my brick?
It can. Old Mill says some sealers darken brick or give a wet, glossy look. Unilock says a wet look deepens paver color and may add gloss, while a natural finish stays close to the unsealed color. Ask for a test on a hidden or spare brick.
Does a brick border on a concrete driveway get sealed too?
It can, but it may need a different product. HydroSeal says concrete pavers and natural stone get different product decisions, and Unilock says materials absorb at different rates. Ask whether the border and the field get one sealer or two.
Can brick pavers be pressure washed before sealing?
With care. First Coast SoftWash says concrete, brick and pavers handle controlled pressure, and Unilock warns that a high-pressure setting can blow out joint sand. Sealwithease says power washing suits brick best when there is no sand in the joints. Ask which tool and pressure will be used.
Which other paver services can a Fruit Cove homeowner ask about?
Bring the warm color back to your brick
Send the form or call, and a local contractor answers inside 1 business day, often by that afternoon.
Free, no obligation